发新话题
打印

求助:忘记了CISCO 2950的密码,怎样才能恢复?

263shanghai

求助:忘记了CISCO 2950的密码,怎样才能恢复?

可以进入CISCO 2950,但是键入EN时,要求输入密码,但是我把密码忘了,进不了配置模式,有哪位大哥、大姐知道如何恢复密码吗??
谢谢!!

../Announce/Announce.asp?BoardID=11&ID=29029&q=1&r=1864
这个帖子的方法CISCO什么型号的交换机都能用吗??是用超级终端连接修改吗?

re:型号不一样,好像是不一样的,你安这种...

型号不一样,好像是不一样的,
你安这种方法做是没有问题的吧
前方是绝路 希望在转角
不在乎今生拥有什么 只在乎做过什么
全力打造中国网络技术交流社区
http://www.itroute.net

re:暂时没法改,上班要用的。等空的时候改。...

暂时没法改,上班要用的。等空的时候改。

re:Cisco交换机口令的恢复(Cataly...

Cisco交换机口令的恢复(Catalyst 2900-XL and 3500-XL)

Contents
Description
Step-by-Step Procedure
Related Information

Description
This document describes the password recovery procedure for the Cisco Catalyst 2900-XL and the Cisco Catalyst 3500-XL.

Step-by-Step Procedure
Attach a terminal or PC with terminal emulation to the console port of the switch. Use the following terminal settings:
9600 baud rate
No parity
8 data bits
No stop bit

Unplug the power cable.
Hold down the mode button while reconnecting the power cord to the switch. You can release the mode button a second or two after the LED above port 1x is no longer illuminated.
The following instructions appear:

The system has been interrupted prior to initializing the flash file system.
The following commands will initialize the flash file system, and finish loading
the operating system software:

flash_init
load_helper
boot

Type flash_init.
Type load_helper.
Type dir flash:.
The switch file system is displayed:

Directory of flash:
2 -rwx 843947 Mar 01 1993 00:02:18 C2900XL-h-mz-112.8-SA
4 drwx 3776 Mar 01 1993 01:23:24 html
66 -rwx 130 Jan 01 1970 00:01:19 env_vars
68 -rwx 1296 Mar 01 1993 06:55:51 config.text
1728000 bytes total (456704 bytes free)

Type rename flash:config.text flash:config.old to rename the configuration file.
This file contains the password definition.

Type boot to boot the system.
Enter N at the prompt to start the Setup program, Continue with the configuration dialog? [yes/no] : N
At the switch prompt type en to turn on enable mode.
Type rename flash:config.old flash:config.text to rename the configuration file with its original name.
Copy the configuration file into memory.
Switch# copy flash:config.text system:running-config
Source filename [config.text]? (press Return)
Destination filename [running-config]? (press Return)

The configuration file is now reloaded.

Change the password.
switch#config terminal
switch(config)#enable password Cisco

Write the running configuration to the configuration file.
switch(config)#write mem

好好學習﹗努力賺錢﹗﹗﹗MIS信息技术联盟http://www.itmis.cn
发新话题
  清除 Cookies - 联系我们 - 邮件技术资讯网 - Archiver - WAP - 繁體中文
当前时区 GMT+8, 现在时间是 2008-9-8 02:21

本论坛为非盈利中立机构,论坛所有言论纯属发表者个人意见,与《 邮件技术资讯网》论坛立场无关。内容所涉及的版权和法律相关事宜请参考各自所有者的条款。
如果认定侵犯了您的权利,请联系我们尽快处理。本论坛原创内容请联系本站后再行转载并务必保留我站信息。此声明修改不再另行通知,本论坛保留最终解释权。
*本论坛QQ群:1#群2233231(已满) 2#群2598254(推荐) 3#群15974064(推荐) 4#群14173252(推荐)*
* 建议使用 1024×768 模式查看本论坛 *
Powered by Discuz! 6.1.0